001

Wireless nurse call system for hospitals and dispensaries

Wireless nurse call system runs on RF technology. The system consists of wireless remote controllers and receiver display units. The systems support over 6000+ call points.

002

Wireless peon call bell system

Wireless peon call bell set comprises of a set of remote controllers and receivers. Every remote has a corresponding indicator with buzzer sound on the receiver. The receiver runs on power and is stationary. Remotes can be fixed on wall handheld. Signal range 30-40 meters indoor. Signal boosters enhance the range even further.

003

Wireless paging system, 6 calling point portable devices

The wireless paging system is an innovative solution that supports 6 calling points. The receiver is a handheld portable device, that attendant can carry and roam around. The receiver runs on rechargeable Li-ion battery. A single full charge runs for 5-7 days. Receiver battery charging time 5-6 hrs. Remotes, non-rechargeable alkaline battery, usually lasts for 2-3 years.

004

2 remote wireless panic alarm (108-decibel loudness)

The wireless paging system is an innovative solution that supports 6 calling points. The receiver is a handheld portable device, that attendant can carry and roam around. The receiver runs on rechargeable Li-ion battery. A single full charge runs for 5-7 days. Receiver battery charging time 5-6 hrs. Remotes, non-rechargeable alkaline battery, usually lasts for 2-3 years.

005

Data logger with 24×7 recording and WiFi for log download

Data logger unit device records the remote controller activity 24×7. Continuous data recording on SD card. Possible to download the data over the hotspot WiFi interface (on any smart device). Has internal RTC (real time) to record real-time data.

006

GSM automatic dialler, remote control trigger send SMS and missed calls

GSM automatic dialler is a device, that sends SMS and missed calls to 5 different phone numbers. A remote controller can trigger the GSM automatic dialler over wireless. This system uses the GSM network to deliver SMS and missed calls. The 5 emergency phone numbers should be pre-configured.

007

Border patrol alarm system, remote controller range 2-3Kms

Border patrol alarm system equips with long-range remote controllers, display and sirens. The range of the remote controller is 2-3 km. In open line of sight, the range improves to over 6-8 km (depending on side conditions).

008

11 channel remote controller range 2-3Kms

11 channel wireless remote controller is an industrial rugged handheld remote. The signal strength is so much that the range is 2-3 km or even more. The 11 channel remote triggers 11 independent relays (each with 5 Amps capacity). The receiver can drive motors, lights, PLC, alarms, sirens, or similar electrical devices. Remote runs on battery, whereas, the receiver 12-volt power operated.

009

8 remote wireless attendant calling system

8 remote wireless calling system works on RF technology. Remotes work on battery and receiver is a static unit with the attendant. Every remote has a corresponding indicator light on the receiver. On every new call from a remote, the indicator glows along with buzzing sound.

010

Remote control token up/down counter

Best suited for OPDs, dispensaries, banks, cashier counter, teller desk. Pressing the top button of remote +1, while bottom button -1. Center button to call again. Internal battery backup to save current display number (to recover from power blackouts). Token numbers from run from 00-99/000-999/0000-9999 and roll back.

011

3 channel transmitter receiver

3 channel transmitter-receiver for industrial systems. Range of signals 20-30 meters indoors and 100-120 meters outdoors. 3 port relay receiver. Each potential free contact point relay can sustain load up to 5-7Amps @ 240VAC.

012

Remote control count up timer (mm: ss)

Remote control trigger count up timer. Suitable for count up/down operations in factories, operation theaters, industries, and sports. Timer counts from 00:00 till 99:59 (minutes:seconds). A remote controller triggers the timer ON/HALT/STOP. Accuracy 1-second delay in every 1000 hrs.

013

Remote control traffic light

Wireless traffic light controller system operates the light with RF remote controllers. Using the remote, the light can operate from a distance of few 100 meters to over a distance of even 2-3 Kms. The traffic lights are of high intensity (+6000lm) and 300mm Dia. The outer casting is weather resistant polycarbonate. The system, finds it utility in parking lots, factories, airports etc.

014

Traffic light wiring

Traffic light wiring diagram and procedure is clearly explained in this video demonstration.

015

Unmanned railway crossing alarm system

Unmanned railway crossing alarming system is a solution at alert approaching trains. At the level crossing, a rain arrival alerted to the pedestrians and vehicles. Once the train detection happens on either of the sides of the crossing, signals sent across. These signals travel over many kilometers through the air. The underlying technology is a long-range RF wireless.

016

Wireless call bell with acknowledgment

1 call bell with acknowledgment is very popular among office managers to call peons. Also used by OPD single room doctors to call duty nurses. Press transmitter calling device to alert the reception or attendant. Once the receiver gets radio signals, it sends back acknowledgment to the transmitter.

017

Wireless panic alarm system with 108-decibel siren

Wireless panic alarm system comprises of transmitter panic button and a receiver siren. Pressing the siren sends alert signals to the receiver siren. The alarm is 108 decibels loud and audible from over 50-100 meters. The signal range of the transmitter is around 100-150 meters in open line of sight. Indoors the range is 30-40 meters (depending on the environmental conditions).