Wireless nurse call system

Wireless nurse call system, from FORBIX SEMICON is a new advancement in technology. An appropriate electronic solution for the modern day hospital. It holds the latest cutting edge wireless methods at its core. Since the machines need neither any wiring nor any installation. It becomes, very simple for hospital staff to deploy within minutes. The wireless nurse call system is scalable from a few beds to many. No future maintenance needed. This enables patients to use, the nurse call system in mere minutes after receiving. Such a quick turn around time is possible because of the agile architecture.

Wireless nurse call system architecture

Hospitals worldwide, deploy FORBIX SEMICON wireless nurse call system solution. This wireless attendant call system caters from a few beds to even over thousand beds. However whatever might be some underlying limitations of the signal range, it is overcome by repeaters. Signal range improves by, intermediate repeaters and boosters. Because of these boosters, no corner of the hospital can now remain in touched. Furthermore, the boosters are capable of catching even feeble signals from the remotes. This therefore, gives an illusion to the user of increased battery life of the remotes.

Advantages of wireless nurse call system over wired

Wireless solutions are far more advanced and better than wired systems. However, it works on the latest RF technology.

  • First of all, wireless nurse call system needs no wiring or installation
  • Neither there is any future maintenance involved, this rather saves cost
  • Moreover, there is no limitation to the range of communication
  • Further, the complete system is expandable and scalable. Suppose a user has opted for 30 remote sets. They can add another 20 remotes to the existing set. Even without making any changes to the existing system, and while it is running
  • Because of modular components, the user can add and remove a particular device at choice
  • And most of all the units are elegant, robust and reliable


Wireless remote control

Remote control

  • Handy and lightweight remote control for patients
  • FBX521 (remote with a jacket to fix mount on a wall)
  • FBX521R (remote with ribbon)
  • Battery type: 12volts DC / 23A
  • Range indoors: 20-30 meters
  • Range outdoors: 100-120 meters
  • Battery life: 3-4 years


Wireless Remote control Model:FBX521
Remote with ribbon Model:FBX521R

Wireless patient call buttons

Patient call buttons, wall mount

  • Wall mount patient call buttons for bed and washrooms
  • FBX545: IP65 enclosure specially designed for washrooms
  • FBX525: elegant looking enclosure suited for bedside
  • Extended 0.5-1 meter bed switch cable
  • Range indoors: 20-30 meters
  • Range outdoors: 100-120 meters
  • Runs on battery, life: 3-4 years

Washroom / toilet call button Model: FBX545
Bed call button Model: FBX525

Application of patient call button

Patient call button
Patient bed button
Washroom call button

Nurse call station, display / indicator type

Nurse call station

Display type receiver, 2-digit, 3-digit, 4-digit
Indicator type receiver, 10-32 indicator lights (1 per bed)
Supports up to 250 patient call points (per display)
On display customized room nos: 401, 312A, 78, 12E etc.
Accommodates total 6000+ calling point
Operates on 12VDC (comes along with 220-110VAC converter)

Display nurse station Model: FBXCSL03A
Indicator nurse station Model: FBXCSI20A

Application of nurse station

Display type nurse station
Nurse station data logger
Indicator type nurse station
Difference of indicator and display 

Indicator system


3 or 4-bed numbers associated with an indicator module
Location of room and door indicator should be outside the room
When some patient calls from inside the room corresponding indicator blinks
The indicators have blinking lights and beeping sound
Operates on 12VDC (comes along with 220-110VAC converter)

Room module indicator Model: FBXRM01
Corridor module Model: FBXCM30

Application of indicator system

Door module indicator 
3 beds room module indicator
Corridor module indicator
Room module indicator 

Signal boosters and CODE BLUE

Signal boosters and CODE BLUE

Repeater booster enhances the range of signals furthermore
Low and high power repeater provides additional 20-30/50-60meters
Every additional repeater improves the signal to noise ratio (SNR)
It is possible to install multiple repeaters in series

CODE BLUE indicator for a specific set of emergency alerts
The receivers can be in the corridor or nurse station
Operates on 12VDC (comes along with 220-110VAC converter)

Repeater, signal booster Model: FBXRPT
Corridor module Model: FBXCM30

Application image

Signal range of repeater
GSM automatic dialer application
Repeater application
Revolving indicator application

Demonstration video